From: route@monster.com
Sent: Monday, October 26, 2015 10:55 AM
To: hg@apeironinc.com
Subject: Please review this candidate for: drive tseter
This resume has been forwarded to
you at the request of Monster User xapeix01
|
|||||||
|
|||||||
|
|
|
||||||
|
||||||
Jessie James Jones, Jr. Miami,
FL 33127 ¿ 904.323.9634 ¿ Jessie.Jones.Jr@gmail.com Sr.
Specialist: Product Development Engineer
Objective:
Seeking a new opportunity to grow and advance in the telecommunications
field; utilizing my wide breath of device certification knowledge, my ever
growing L2/L3 Protocol knowledge, and my willingness to travel/relocate, to
provide the highest level of service and flexibility to a new employment
opportunity. Professional Experience AT&T
Wireless., — Miami,
FL
Sr. Specialist: Product Development Engineer.
l
Extensive experience writing and performing device
certification tests plans both mobile and stationary, using 16411 10776
13340. l
Extensive experience with E911 Testing (using
PSAP SIM) for both non-AGPS and AGPS capable devices on GSM/UMTS/VoLTE. l
Extensive experience with LTE air-interface debug
and analysis tools (Wireshark, QXDM/QPST/QCAT, Mobile Analyzer, Artemis,
Spirent, TEMS, ADB logging using CMD, etc.). l
Working experience with LTE/UMTS protocol stacks Layer
3 (RRC, NAS) and Layer 2 (PDCP/RLC/MAC). l
Working experience in identifying functional and
performance issues by analyzing failure logs. l
Working experience with IMS/VoLTE testing. l
Experienced managing non-local contractors both
internally and from 3rd party vendors. l
Working knowledge of EPC Architecture S1AP, S11,
S3/S4, S1-MME, S1-U, S11, S6a, S5/8, etc. l
Working knowledge of IP-related protocols including
Diameter, SIP, RTP, TCP/IP, UDP, IPSEC, SCTP, etc. l
Regular Awards solutions quarterly training on
UMTS/LTE/VoLTE/IMS. AT&T
Wireless., — Lake
Mary, FL
Contractor-Sr. Specialist: Product Development
Engineer.
·
Manual and automated handset feature testing on
GSM/UMTS. ·
Multi-vendor device certification using various vendor
specific software packages for device upgrades and logging. ·
Using of log capturing as needed to support both
regression testing and defect submission during validation testing.
(Wireshark, QXDM, TEMS, Vendor tools). ·
Performance Benchmark drives using Metrico Wireless
Nomad (now Spirent). ·
Offered fulltime position well before 3 year contract expiration
due to outstanding metrics and device testing knowledge. Infineon
Technologies., — Munich,
Germany
UMTS Protocol Stack Engineer
·
1.5 Months of coordinated training from a joint
Infineon and Sasken team at Infineon Headquarters in Munich, Germany. ·
UMTS/GSM protocol testing on Layers 1, 2, and 3 with
emphasis placed on MAC, RLC and RRC. ·
Extensive feature testing on prelaunch Apple iPhone 4. ·
Experience with Mobile Analyzer for Layer 3 trace
collection and Artemis for firmware trace logs. ·
Extensive use of AT commands during testing. ·
Use of Wireshark for IP packet sniffing logs. ·
Use of UTP/Clearcase for raising CR reports. ·
Use of flash tools for flashing both chip software and
editing phone information such as IMEI and SIM card information. ·
Familiar with preparing detailed statistical and
qualitative reports to assist back office second level analysis. Neilsen
Mobile., — Lynchburg,
VA
Mobile Test Technician-Associate RF Engineer
·
Multi-Carrier competitive Benchmarking on
GSM/UMTS/CDMA-2000 networks for both CS/PS/MRAB performance. ·
Automated testing environment with a strong emphasis
on accurate data collection. ·
Data collection using Andrews Invex 3G equipment. ·
Drive Route based driving with 250 miles per day requirement. ·
Quick Learner-Completed scheduled 4 week training in 7
days; in market testing on day 5 after initial hire. Teksystems,
inc., — FORT
LAUDERDALE, FL
E911 Associate RF Engineer
·
RNC Rehome testing on a UMTS/GSM network. ·
E911 Call testing, validating correct call phase,
MSISDN, and site address are being relayed. ·
CS MO and MT calling (M2M, M2PSTN, PSTN2M, and VM) ·
Stationary testing using device Engineering Mode to
run cases on all 3 sectors of the BTS/Node-B. ·
PS and MRAB validation after rehoming. ·
Detailed manual error report generation for failed
cases using excel. ·
Testing performed during maintenance window, regular
staff calls before testing ·
Navigation using Microsoft Streets and Trips. Sublime
Wireless, Inc., — WHITE
PLAINS, NY
Associate RF Engineer
·
Data Collection and functionality testing over
GSM/UMTS ·
Coordination with RF Engineers serving to optimization
network, reduce dropped calls, reduce interference levels, blockage and HO
failures. ·
Troubleshooting device test HW/SW ·
Utilizing drive testing equipment (TEMS mobile kit). ·
Navigation using DeLorme Global
wireless solutions., — CHANTILLY,
VA
Associate RF Engineer
·
Multi-Carrier competitive benchmarking for both
CS/PS/MRAB performance. ·
Automated testing environment with a strong emphasis
on accurate data collection. ·
Setup/Operation/Maintenance/Troubleshooting of Comarco
Symphony 7.5 and 9. ·
Drive Route based driving with 250 miles per day
requirement. ·
Navigation using DeLorme. Education & Certifications University
of North florida — Jacksonville,
Fl
Seeking Bachelor’s Degree in Electrical
Engineering (in progress) Notes References
upon request, US Citizen, Open to Relocation and Travel |
|
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
|